Description
Oatey® FlowGuard Gold® CPVC Cement, 1-Step All Weather Low VOC Medium Body, 16 oz Container, For Use With: Upto 2 in Dia CPVC Hot and Cold Potable Water Pipe and Fittings, Yellow, Solvent Odor/Scent, Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Chlorinated, Acetone, Cyclohexanone, Silica, Amorphous, Fumed, 4 to 5 min Setting, 1 or 6 hr Curing, 0 to 115 deg F
Features:
- For cold water systems and hot water systems up to 200 deg F
- Low VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements
- May be used without primer where local codes permit
- FlowGuard Gold® is a registered trademark of The Lubrizol Corporation
- When solvent cement is applied properly, the yellow formula will glow blue under ultraviolet light
- 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting time
- 400 psi (2 hr at 73 deg F) hydrostatic burst strength
- Minimum 500 cps at 73 deg F +/- 2 deg F viscosity
- 1 hr Cold/6 hr hot water above 6 deg F curing
- For cold and hot water systems up to 200°F / 93°C
- Allows for quick, easy inspection of dry fit joints with UV light
- Can be used on copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in. diameter with interference fit
- Approved for use with FlowGuard Gold® piping systems (registered trademark of The Lubrizol Corporation)
- No primer needed where local codes permit
Standards/Approval:
- ASTM F493
- IAPMO Listed
- NSF 61 for PW
- DWV and Sewer Waste
