Description
NIBCO® Ball Valve, 2-Piece, Series: PS-585-70-66, 1/2 in Nominal, Male Press x Press, 200 psi, 250 deg F, Full Port, Media: Water, 1/2 in Orifice, Locking Lever Handle Actuator, Stainless Steel Ball, 6.56 in Inlet to Outlet Length, 1.88 in Top to Inlet Center, Bronze Body, 316 Stainless Steel Trim, PTFE, Domestic
Features:
- Valve pressure rating 200 psi/13.8 bar non shock cold working pressure
- Maximum service temperature 250 deg
- Blowout-proof stem
- Vented ball
- Dezincification resistant
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- The NIBCO Press System bronze ball valve features press x press male end connections for quick and easy joinery to female press connections
- Simply applying pressure from a press-fit tool tightens the O-ring onto the tube, ensuring a clean, permanent, watertight seal in seconds, with no flame, solder or flux
- With the full port design and vented stainless steel ball, the ball valve allows unobstructed bi-directional flow
Applications:
Potable Water, Mechanical HVAC and Process Water Applications
Standards/Approval:
- ASTM B584 Alloy C84400 Body
- ASTM A276 Alloy S31600 Ball
- ASTM A276 Alloy S31600 Stem
- MSS SP-110
- UL Certified to NSF/ANSI 61
- PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
5 years Limited
