Description
NIBCO® Ball Valve, Series: TPC-585-70-LL, 1/2 in Nominal, NPT x Female Press, 250 psi, 250 deg F, Full Port, 1/2 in Orifice, Locking Lever Handle Actuator, Brass Ball, 3.38 in Inlet to Outlet Length, 1.96 in Top to Inlet Center, Bronze Body, Silicon Bronze/PTFE Trim, EPDM, Domestic
Features:
- Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
- Maximum service temperature 250 deg
- Bronze trim blowout-proof stem
- Reinforced PTFE seat rings
- Threaded x press female end connections
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- The NIBCO Press System bronze ball valve body is manufactured from dezincification resistant bronze
- With the full port design and chrome plated ball, the ball valve allows maximum flow and minimum pressure drop or turbulence with unobstructed bi-directional flow
- Properly applying pressure from a press-fit tool tightens the O-ring onto the tube, ensuring a clean, permanent, watertight seal in seconds, with no flame, solder or flux
- This ball valve features a new design that allows a leak to occur during testing if the press connection is not properly crimped
Standards/Approval:
- ASTM B584 Alloy C84400 Body
- ASTM B371 Alloy C69300 or ASTM B371 Alloy C69430 Stem
- ASTM B16 Alloy C36000 or ASTM B283 Alloy C37700 Ball
- MSS SP-110
- PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
5 years Limited
