CM® 50 ton Anchor Shackle, Alloy Steel, Galvanized

Description

CM® Anchor Shackle, 50 ton Load, 2 in Size, 2-1/4 in Pin Diameter, Bolt/Nut/Cotter Pin, 7-3/4 in Inner Length, 5-1/4 in Inner Width, 3-1/4 in Opening, 5-1/4 in Eye Outer, Alloy Steel Body, Alloy Steel Pin, Galvanized

Features:

• Made of special bar quality (SBQ) steel having fine grain, reduced sulfur and phosphorus
• Shackles show major deformation before failure
• Working load limit and traceability codes shown as permanent markings on body
• All shackles have alloy quenched and tempered pins
• Provides the most secure pin arrangement
• Resists axial loading and torsional loading
• Anchor shackles can be side loaded or used for multiple connections
• Special products engineering available to fit your special lifting, tie down and pulling needs
• 5:1 design factor
• Galvanized finish

Standards/Approval:

• Federal Specification RR-C-271D

Body Material	Alloy Steel
Eye Outer Size	5-1/4 in
Finish	Galvanized
Inner Length	7-3/4 in
Inner Width	5-1/4 in
Load Capacity	50 ton
Opening Size	3-1/4 in
Pin Diameter	2-1/4 in
Pin Material	Alloy Steel
Pin Type	Bolt/Nut/Cotter
Size	2 in
Manufacturer	CM®