CM® Anchor Shackle, 10 ton Load, 1 in Size, Carbon Steel

Description

CM® Anchor Shackle, Super Strong, 10 ton Load, 1 in Size, 1.13 in Pin Diameter, Bolt/Nut/Cotter Pin, 3-3/4 in Inner Length, 2.52 in Inner Width, 1.72 in Opening, 2.44 in Eye Outer, Carbon Steel Body, Alloy Steel Pin, Galvanized

Features:

• Designed with a 5:1 design factor and have a strength rating approximately 50% higher than a comparable-sized carbon shackle and about 25% stronger than super strong shackles
• Can be side loaded or used for multiple connections
• Made of special bar quality (SBQ) steel having fine grain, reduced sulfur and phosphorus
• Shackles show major deformation before failure
• Working load limit and traceability codes shown as permanent markings on body
• All shackles have alloy quenched and tempered pins
• 1.22 in inner eye
• Threaded pin lock

Standards/Approval:

• Federal Spec RRC-271D ASME B30.26
• ASTM A153

Body Material	Carbon Steel
Eye Outer Size	2.44 in
Finish	Galvanized
Inner Length	3-3/4 in
Inner Width	2.52 in
Load Capacity	10 ton
Opening Size	1.72 in
Pin Diameter	1.13 in
Pin Material	Alloy Steel
Pin Type	Bolt/Nut/Cotter
Size	1 in
Type	Super Strong
Manufacturer	CM®