CM® Anchor Shackle, 2 ton Load, 3/8 in Size, Alloy Steel

Description

CM® Anchor Shackle, 2 ton Load, 3/8 in Size, 0.438 in Pin Diameter, Bolt/Nut/Cotter Pin, 1.437 in Inner Length, 0.937 in Inner Width, 0.656 in Opening, 1-1/8 in Eye Outer, Alloy Steel Body, Alloy Steel Pin, Orange Powder Coated

Features:

• Made of special bar quality (SBQ) steel having fine grain, reduced sulfur and phosphorus
• Shackles show major deformation before failure
• Working load limit and traceability codes shown as permanent markings on body
• All shackles have alloy quenched and tempered pins
• Provides the most secure pin arrangement
• Resists axial loading and torsional loading
• Anchor shackles can be side loaded or used for multiple connections
• Special products engineering available to fit your special lifting, tie down and pulling needs
• 5:1 design factor
• Orange powder coat painted finish

Standards/Approval:

• Federal Specification RR-C-271D

Body Material	Alloy Steel
Eye Outer Size	1-1/8 in
Finish	Orange Powder Coated
Inner Length	1.437 in
Inner Width	0.937 in
Load Capacity	2 ton
Opening Size	0.656 in
Pin Diameter	0.438 in
Pin Material	Alloy Steel
Pin Type	Bolt/Nut/Cotter
Size	3/8 in
Manufacturer	CM®