The MS4604F1210/U FIRE AND SMOKE DIRECT COUPLED ACTUATOR from NEUCO INC is engineered for reliable operation in fire safety systems. This actuator is designed to respond quickly to smoke and fire conditions, ensuring effective control of dampers and ventilation systems. Its robust construction and compliance with industry standards guarantee durability and safety in critical applications. The actuator features a compact design for easy installation, making it an essential component for fire protection systems.
Commercial Building Controls : Dampers and Damper Actuators : Fire and Smoke Damper Actuators : 230 Vac Fire/Smoke Actuators : 30 lb-in. 230V : MS4604F1210/U
Fast-acting, two-position actuator with 30 lb-in., 2 aux. switches, spring return
Overview
Honeywell's Fast-Acting, Two-Position Actuators are line volt (230V), 30 lb-in., spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). The actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation.
Features
- 30 lb-in. (3.4 Nm) minimum driving torque at 350 F (176 C).
- Reversible mounting facilitates use in either clockwise (cw) or counterclockwise (ccw) spring rotation
- Integral spring return ensures level of return torque
- Fifteen-second spring return timing
- No special cycling required during long-term holding
- No audible noise during holding
- Patent pending design eliminates need for limit switches to reduce power consumption
- Ninety-five degree angle of rotation
- Actuator holds rated torque at reduced power level
- Die-cast aluminum housing
- Housing design allows flush mounting to damper
- Designed to operate reliably in smoke control systems requiring Underwriters Laboratories Inc. UL555S ratings up to 350 F
- Models available with SPST position-indicating switches (7 degree, 85 degree stroke)
Product Specifications
- Application
- Fire and Smoke
- Dimensions (in.)
- 8.9 in high x 5.13 in wide x 3.32 in deep
- Dimensions (mm)
- 227 mm high x 129 mm wide x 84 mm deep
- Weight (lb)
- 5 lb
- Weight (kg)
- 2.3 kg
- Materials
- Aluminum housing
- Comments
- Two integral 3/8 in. clip-in flexible conduit connections
- Item Type
- Product
- Mounting
- Direct Coupled
- Frequency
- 50 Hz; 60 Hz
- Approvals, Underwriters Laboratories Inc.
- UL873, Plenum Rated
- Electrical Connections
- Color-coded leads
- Operating Humidity Range (% RH)
- 5 to 95% RH, non-condensing
- Supply Voltage
- 230 Vac 10%
- Power Consumption
- Driving-- 0.13A, 18W, Holding-- 0.10A, 11W
- Shipping and Storage Temperature Range (F)
- -40 F to 140 F
- Shipping and Storage Temperature Range (C)
- -40 C to +60 C
- Approvals, Canadian Underwriters Laboratories Inc.
- cUL C22.2 No. 24-93
- Ambient Temperature Range (F)
- 0 F to +130 F
- Ambient Temperature Range (C)
- -18 C to +55 C
- Switch Ratings
- 125 Vac/24 Vdc, 3A res
- Regulatory Compliance Mark
- N314
- Environmental, Electrical or Ingress Protection Rating
- NEMA 1, IP40
- Internal Auxiliary Switch
- 2
- Maximum Noise Rating
- Driving (dB(A) @ 1m)-- 80; Holding (dB(A) @ 1m)-- 20 (no audible noise)
- Stroke
- 95 3 degrees
- Shaft Dimensions (in.)
- 1/2 in. round
- Actuator Type
- Damper
- Control Signal
- Two position; SPST
- Fail Safe Mode
- Spring Return
- Torque Rating (lb-in.)
- 30 lb-in.
- Torque Rating (Nm)
- 3.4 Nm
- Spring Return Torque/Force (lb-in., lbf)
- 30 lb-in.
- Spring Return Torque/Force (Nm, N)
- 3.4 Nm
- Additional Torque Ratings (lb-in.)
- Maximum Stall-- 150 lb-in.; Minimum Driving at 350 F-- 30 lb-in.
- Additional Torque Ratings (Nm)
- Maximum Stall-- 17 Nm; Minimum Driving at 175 C-- 3.4 Nm
- External Auxiliary Switches Available
- No
- Timing, Nominal
- Driving @ 60 Hz-- 15 sec
- Spring Return Timing
- 15 sec
- Shaft Adapter Type
- Aluminum Hub, two set screws
- Shaft Dimensions (mm)
- 13 mm round
- Spring Return Direction
- By orientation
- Electrical Connections (in.)
- 32 in.
- Electrical Connections (mm)
- 0.8 m
