Description
NIBCO® Gate Valve, Series: S-136, 3/4 in Nominal, Solder, 300 psi, 150 lb, Media: Air/Gas/Water, Handwheel Actuator, 2.51 in Inlet to Outlet Length, 3.91 in Top to Inlet Center, Bronze Body, Silicon Bronze Trim, Aramid Fiber/Graphite, Domestic
Features:
- 150 psi/10.3 bar saturated steam to 366 deg /185 deg
- 300 psi/20.7 bar non-shock cold working pressure
- Class 150 solder end connections
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- Dezincification resistant
- The NIBCO bronze gate valve features a union bonnet for service where reparability in-line is required
- Non-rising stem gate valves are used when shutoff is required and a space saving is necessary
- The solder ends allow for ease of installation
- The split wedge, integral seats and bi-directional service make the gate valve a good choice for a broad range of services
Applications:
For commercial and industrial applications, including hot and cold water, HVAC, steam, gas and other general utility services
Standards/Approval:
- ASTM B371
- ASTM B62 Body
- MSS SP-80
- PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
50 years Limited
