Description
TPI Electric Institutional Wall Convector, 1-Phase Standard, Series: 8800, 4266 Btu/hr, 346 V AC, 3.613 A, 1.25 kW, 40 to 110 deg F, Wall Mount, Steel, Ivory, Textured Powder Coated, 48 in L x 5 in W x 18 in H
Features:
- 11 ga perforated steel housing powder coated with textured ivory finish
- Tamper proof left side control panel houses built-in single pole thermostat range 40 to 110 deg F and disconnect switch, thermostat on 120 to 277 V units is line voltage and low voltage 24 V on 346 to 600 V units
- Linear limit type thermal overload with automatic reset
- Tamper proof fasteners
- Stainless steel element with aluminum fins
- Institutional enclosure 11 ga perforated steel with sloped top design
- Heavy duty end caps welded to the enclosure
- Control compartment for housing thermostat and disconnect switch is accessible by use of security type fastener
- The entire enclosure is protected by epoxy powder coated paint finish
- All steel high mass element construction with nickel-chromium resistance wire embedded in compacted efficient dielectric to ensure proper heat transfer
- Aluminum fins mechanically bonded to steel tube allows for increased surface area and even heat transfer
- Automatic reset hydraulic thermal overload covers full length of heating element and shuts down heater when safe operating temperatures are exceeded
Applications:
Indoor-Commercial, Industrial and Institutional Applications
Standards/Approval:
- cETLus Listed
- PROP65: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer
- and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.cs.gov
Warranty:
1 Year Limited
