Description
TPI Unit Heater, 3-Phase Fan Forced Standard, Series: 5100, 85.3/64 Btu/hr, 208/240 V AC, 60.2/52.1 A, 25/18.7 kW, 2000/1800 cfm, 40/44 deg F, Wall Mount, 12 ft Horizontal/22 ft Vertical Mounting Height, Steel, Gray, Powder Coated, 34 in H x 29-1/4 in W x 10-1/16 in D, 28-11/16 in H x 21-1/2 in W x 6-1/2 in D
Features:
- Heavy 18 ga welded steel cabinet with powder coated beige and brown two tone finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation, and maintenance
- Copper clad steel sheath element with continuously brazed stell fins formed to allow side draw through air flow
- Equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur
- Totally enclosed, two speed, single phase permanently lubricated, thermally protected motor with sleeve bearings
- Motors mounted with rubber insulators to minimize vibration and noise
Applications:
Indoor-Commercial and Industrial Applications
Standards/Approval:
- ARRA Compliant
- Buy American Act Compliant
- cETLus Listed
- ABS Approved
- PROP65: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer
- and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.cs.gov
Warranty:
1 Year Limited
