The USCFW100016S2024ESZ Inverter by WEG Electric Corp is a high-performance device designed for variable frequency drive applications. With advanced technology, it provides precise control over motor speed and torque. This inverter is suitable for a wide range of industrial applications, ensuring energy efficiency and optimal performance. Its robust design and compliance with international standards make it a reliable choice for demanding environments. The inverter supports various communication protocols for seamless integration.
Item # CFW100016SDZ, Variable Frequency Drives, Low Voltage, CFW10, 1/4-3HP Micro Drive On WEG Electric Corp.
WEG Electric Corp. : Variable Frequency Drives : Low Voltage : Drives : CFW10, 1/4-3HP Micro Drive : Item # CFW100016SDZ
The WEG Digital CFW10 VFD Series is an offspring of the very successful CFW08 Plus. In addition to a very small, easily mounted package, simplified keypad and bright LED readout, complete diagnostics and fully programmable I/O, the CFW10 controls three phase AC motors with a single phase AC input, Single phase 120V AC input voltage will produce three phase 230V to drive motors up to 1 HP and single phase 230V AC will produce three phase 230V to drive motors up to 3 HP. Increased flexibility and decreased costs are achieved by eliminating the need for a step-up transformer to operate three phase 230V AC motors when only single phase 115V is available. The CFW10 is an economical solution to many industrial and commercial applications.
| Motor Volts | 230 V |
| Input Power Supply | Single Phase 230V |
| Phases | 3 |
| Motor HP | 1/4 |
| Drive AMPS | 1.6 |
| Frame Size | 1 |
| Enclosure | IP 20 Finger-Safe |
| V/Hz Control | Yes |
| Input Voltage | Single Phase 110-127V input voltage up to 1 HP. Single Phase 200-240V input voltage up to 3 HP. |
| Diagnostic Features | Over current, motor overload, drive over temperature, output short circuit, DC bus over and under voltage and external fault |
| Control features | Linear and S-Ramp acceleration and deceleration, local/remote control, DC braking, torque boost, motor slip compensation, electronic pot, preset speeds, minimum and maximum adjustable frequency limits, adjustable output current limit, JOG |
| Display Readings | Motor speed, frequency, voltage, current, last fault, heatsink temperature and drive status |
| Ambient Temperature | 50 C |
| Altitude | 3300 ft1000 m |
| Humidity | 90% humidity, non-condensing |
| Current Overload Capacity | 150 % |
| Switching Frequency | 2.5-15 kHz adjustable switching frequency |
| Inputs | Four isolated programmable digital inputs. One isolated programmable analog input. |
| Outputs | Programmable relay output. |
| PWM Output | DSP controlled PWM output |
| Certifications | CE, UL for US and Canada |
| Notes | HP rating based on average FLA values. Use as a guide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS of drive. For other technical data please refer to WEG product manual. |
| Dimensions | 5.2 x 3.8 x 4.8 |
| Approx. Shipping Weight | 2 lbs |
| Disclaimer | Data subject to change without notice. |
