Pillow Block Ball Bearing Unit, 1-15/16 in Bore, Timken SAL1 15/16

Description

Timken®, SAL1 15/16, Pillow Block Ball Bearing Unit, Floating Normal Duty, Series: SAL, 1-15/16 in Bore, 8-1/4 in Bolt Center-to-Center Length, 2-3/4 in Base to Bore Centerline, 5-1/4 in Overall Length, 4-19/32 in Overall Width, Two-Bolt Base Mounting, Round Bore, 2-3/4 in Base Width, Eccentric Locking Device, Contact Seal, Fixed Expansion, 7890 lb Dynamic/5210 lb Static Load, 250 deg F, 5000 rpm Maximum, Cast Iron, Uncoated

Features:

• The floating unit allows the bearing-to move axially as the shaft expands from rising temperatures
• The fixed unit maintains shaft location
• The bearings have a loose internal fit
• The SAL unit is equipped with a self-aligning SM wide-inner-ring bearing and a self-locking collar
• The external aligning ring is fitted to the spherical surface of the outer-ring
• These types are equipped with oil-tight seals
• They're normally fitted for oil lubrication, but they can be equipped for grease lubrication when specified
• Before installation, lubricate with high-grade automotive oil, turbine oil or ball bearing grease
• The units are assembled with a spacer ring (fixed type) by removing the spacer ring, the assembly becomes a floating unit

Applications:

Agriculture, Food Processing, Fans, Blowers and Conveyors

Base to Bore Centerline	2-3/4 in
Base Width	2-3/4 in
Bolt Center-to-Center Length	8-1/4 in
Bore Diameter	1-15/16 in
Bore Type	Round
Expansion Type	Fixed
Finish	Uncoated
Load Capacity	7890 lb Dynamic/5210 lb Static
Locking Device	Eccentric
Material	Cast Iron
Maximum Speed	5000 rpm
Mounting Type	Two-Bolt Base
Overall Length	5-1/4 in
Overall Width	4-19/32 in
Seal Type	Contact
Series	SAL
Temperature Rating	250 deg F
Manufacturer	Timken®