Timken® Pillow Block Bearing, 1-15/16 in Bore, Normal Duty

Description

Timken®, TAK1 15/16, Pillow Block Ball Bearing Unit, Normal Duty, Series: TAK, 1-15/16 in Bore, 6.22 in Bolt Center-to-Center Length, 2.187 in Base to Bore Centerline, 7.874 in Overall Length, 2-15/32 in Overall Width, 4.437 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.28 in Base Width, Eccentric Locking Device, Tri-Ply Shroud Seal, Non-Expansion (Fixed), 5770 lb Dynamic/3440 lb Static Load, 250 deg F, 500 rpm Maximum, Cast Iron, Uncoated

Features:

• Heavier than our standard block with solid, flat feet for increased strength
• Compact, one-piece housing can be mounted in any position
• Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
• Pre-lubricated and ready for immediate installation
• Grease fitting for relubrication
• TAK with G-KPPB (tri-ply seal) wide-inner-ring ball bearings

Applications:

Agriculture, Food Processing, Fans, Blowers and Conveyors

Base to Bore Centerline	2.187 in
Base Width	2.28 in
Bolt Center-to-Center Length	6.22 in
Bore Diameter	1-15/16 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	5770 lb Dynamic/3440 lb Static
Locking Device	Eccentric
Material	Cast Iron
Maximum Speed	500 rpm
Mounting Type	Two-Bolt Base
Overall Height	4.437 in
Overall Length	7.874 in
Overall Width	2-15/32 in
Seal Type	Tri-Ply Shroud
Series	TAK
Manufacturer	Timken®