Timken® Pillow Block Ball Bearing, 3/4 in Bore, Normal Duty

Description

Timken®, RAK 3/4, Pillow Block Ball Bearing Unit, Normal Duty, Series: RAK, 3/4 in Bore, 3.78 in Bolt Center-to-Center Length, 1-1/4 in Base to Bore Centerline, 5 in Overall Length, 1-23/32 in Overall Width, 2.531 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.311 in Base Width, Eccentric Locking Device, Shroud Seal, Non-Expansion (Fixed), 5680 lb Dynamic/2850 lb Static Load, 250 deg F, 6270 rpm Maximum, Cast Iron, Uncoated

Features:

• Heavier than our standard block with solid, flat feet for increased strength
• Compact, one-piece housing can be mounted in any position
• Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
• Pre-lubricated and ready for immediate installation
• Grease fitting for relubrication
• All units are supplied with self-locking collar
• RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings

Applications:

Agriculture, Food Processing, Fans, Blowers and Conveyors

Base to Bore Centerline	1-1/4 in
Base Width	1.311 in
Bolt Center-to-Center Length	3.78 in
Bore Diameter	3/4 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	5680 lb Dynamic/2850 lb Static
Locking Device	Eccentric
Material	Cast Iron
Maximum Speed	6270 rpm
Mounting Type	Two-Bolt Base
Overall Height	2.531 in
Overall Length	5 in
Overall Width	1-23/32 in
Seal Type	Shroud
Series	RAK
Manufacturer	Timken®