Timken® Pillow Block Ball Bearing, 2 in Bore, Standard Duty

Description

Timken®, RAK2 NT, Pillow Block Ball Bearing Housed Unit, Standard Duty, Series: RAK Series, 2 in Bore, 6.937 in Bolt Center-to-Center Length, 2-7/16 in Base to Bore Centerline, 8.751 in Overall Length, 6.34 in Overall Width, 4.905 in Overall Height, Low Base Mounting, Round Bore, Eccentric Locking Device, Contact Seal, 9750 lb Dynamic/6570 lb Static Load, 3400 rpm Maximum, Cast Iron, Nickel Plated

Features:

• Timken® Survivor® series pillow block and flanged units excel in highly corrosive environments
• A proprietary thin dense chrome (TDC) coating is applied to all bearing inserts for superior corrosion protection
• The TDC coating is designed to not crack or peel under known application conditions
• The unit is factory lubricated with FDA/USDA approved grease (class H1 lubricant) for incidental food contact

Applications:

Food and Beverage, Waste Water, Car Washes, Highway Salt and Sand, Chemical and Rubber, Pharmaceutical, Maritime, Paper Mills and Material Handling Applications

Standards/Approval:

• FDA Compliant
• Precision Class ABEC 1
• USDA Accepted

Base to Bore Centerline	2-7/16 in
Bolt Center-to-Center Length	6.937 in
Bore Diameter	2 in
Bore Type	Round
Finish	Nickel Plated
Load Capacity	9750 lb Dynamic/6570 lb Static
Locking Device	Eccentric
Material	Cast Iron
Maximum Speed	3400 rpm
Mounting Type	Low Base
Overall Height	4.905 in
Overall Length	8.751 in
Overall Width	6.34 in
Seal Type	Contact
Series	RAK Series
Type	Standard Duty
Manufacturer	Timken®