Liberty Pumps® FL64M-2, 100 gpm, Non-Automatic, 1-1/2 in Outlet

Description

Liberty Pumps®, FL64M-2, Mid-Range Head, Series: FL60, 100 gpm Maximum, 15 ft Rated Head, Automatic/Non Automatic: Non-Automatic, 1-1/2 in FNPT Outlet, 6/10 hp, 440 to 480 V AC, 2.8 A Full Load/12.7 A Locked Rotor, 60 Hz Frequency, 3 ph, 3450 rpm Motor, SEOOW 25 ft Cord, Cast Iron Multi-Vane Semi-Open Impeller, 248 deg F Thermal Overload, NEMA 1/4X Enclosure, Ball/Race Bearing, 11.2 in W x 7 in D x 16.4 in H Dimensions

Features:

• Permits passage of solids without clogging
• Heavy cast iron construction
• 416 stainless steel rotor shaft
• Oil-filled hermetically sealed motor
• Permanently lubricated upper and lower ball bearings
• Unitized carbon and ceramic shaft seal
• Manual pump

Applications:

Step Systems, Mound Systems, Liquid Waste Transfer and Higher Head Dewatering Applications

Standards/Approval:

• cCSAus Certified
• SSPMA Certified
• PROP65: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Warranty:

3 Years

Amperage Rating	2.8 A Full Load/12.7 A Locked Rotor
Automatic/Non Automatic	Non-Automatic
Bearing Type	Ball/Race
Cord Type	SEOOW 25 ft
Dimensions	11.2 in W x 7 in D x 16.4 in H
Enclosure Type	NEMA 1/4X
Frequency Rating	60 Hz
Horsepower	6/10 hp
Impeller Type	Cast Iron Multi-Vane Semi-Open
Material	Cast Iron
Maximum Flow Rate	100 gpm
Motor Speed	3450 rpm
Outlet Size	1-1/2 in FNPT
Phase	3
Rated Head	15 ft
Series	FL60
Temperature Rating	248 deg F Thermal Overload
Manufacturer	Liberty Pumps®