Timken® Fafnir® Pillow Block Ball Bearing, 1-7/16 in Bore

Description

Timken® Fafnir®, DRNR1 7/16, Pillow Block Ball Bearing Unit, Normal Duty, Series: DRNR, 1-7/16 in Bore, 8 in Bolt Center-to-Center Length, 3 in Base to Bore Centerline, 10 in Overall Length, 10-7/8 in Overall Width, 4-7/8 in Overall Height, Four-Bolt Base Mounting, Round Bore, 5-1/2 in Base Width, Eccentric Locking Device, Contact Seal, Non-Expansion (Fixed), 6400 lb Dynamic/3440 lb Static Load, 250 deg F, 3930 rpm Maximum, Cast Iron, Uncoated

Features:

• The compact, one-piece housing is equipped with two wide-inner-ring ball bearings with integral R-seals and a self-locking collar
• Individual grease chambers are provided for both bearings
• The close clearance baffles allow excess grease to work into the center chamber of the housing
• The grease fittings that take the place of standard pipe plugs provide the means of relubrication
• This pillow block can be mounted in any position, with ample radial and thrust capacity

Applications:

Agriculture, Food Processing, Fans, Blowers and Conveyors

Base to Bore Centerline	3 in
Base Width	5-1/2 in
Bolt Center-to-Center Length	8 in
Bore Diameter	1-7/16 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	6400 lb Dynamic/3440 lb Static
Locking Device	Eccentric
Material	Cast Iron
Maximum Speed	3930 rpm
Mounting Type	Four-Bolt Base
Overall Height	4-7/8 in
Overall Length	10 in
Overall Width	10-7/8 in
Seal Type	Contact
Series	DRNR
Manufacturer	Fafnir®