Campbell® Eye Nut, 5/8 in, 3600 lb Working Load, Galvanized Steel

Description

Campbell® Eye Nut, Measurement System: Imperial, 5/8 in, Drop Forged Carbon Steel, Galvanized, Working Load: 3600 lb, 1-1/2 in Eye ID, 2-1/2 in Eye OD, 3/4 in Thread Length, 3-9/32 in Overall Height, Material Grade: 776-G/ASTM A153, UNC-2B

Features:

• Do Not Exceed Working Load Limit (WLL)
• The Standard WLL's are established for a Vertical In-Line Pull
• Make Sure Eye Nuts are Properly Seated by Screwing them Down Completely
• Make Sure the Threads in the Hole are Clean and Undamaged
• Loads Must Always be Applied Parallel to the Plane of the Eye and Never Across the Plane
• Always Stand Clear of the Load and Lift the Load With a Steady, Even Pull

Standards/Approval:

• ASTM A153

Warranty:

Lifetime Limited

Diameter - Thread Size	5/8 in
Eye Inside Diameter	1-1/2 in
Eye Outside Diameter	2-1/2 in
Finish	Galvanized
Material	Drop Forged Carbon Steel
Material Grade	776-G/ASTM A153
Measurement System	Imperial
Overall Height	3-9/32 in
Thread Length	3/4 in
Thread Type	UNC-2B
Working Load	3600 lb
Manufacturer	Campbell®