Loctite® Nordbak® Pneu-Wear 3 lb Kit, 2-Part Epoxy

Description

Loctite® Nordbak® Pneu-Wear, 2-Part, Series: PC 7226™, 3 lb, Kit, Liquid/Paste, Dark Gray/Tan, 740 sq-cm Coverage, Chemical Composition: Part A: Fibrous Aluminum Oxide, Epoxy Resin, Silicon Carbide, Silicon Dioxide, Magnesium Oxide, Treated Fumed Silica, Neopentyl Glycol Diglycidyl Ether, Titanium Dioxide, Substituted Silane/Part B: Fibrous Aluminum Oxide, Silicon Carbide, Diethylenetriamine, 4,4'-Isopropylidenediphenol, Amine Adduct, Amine Reacted Fatty Acid, Calcium Carbonate, Silicon Dioxide, Manganese Dioxide, Triethylenetetramine, Silane Derivative, Aliphatic Amine, 6 hr Curing, 250 deg F, <10 g/L VOC, Epoxy Part A/Ammoniacal Part B

Features:

• Recommended for rebuilding, repairing and protecting high wear areas under typical dry service temperatures
• Trowelable
• Filled with small ceramic beads and silicon carbide for maximum protection against fine particle abrasion
• 4:1 mix ratio by volume/by weight
• 30 min work life time
• 15000 psi compressive strength
• D 85 shore hardness
• > 199.4 deg F flash point of part A and 399.2 deg F flash point of part B
• 1.537 specific gravity od part B
• Part A: epoxy resin; part B: epoxy hardener

Applications:

Pneumatic Conveying Systems, Repairing and Providing Abrasion Resistance In Elbows, Slurry Pumps, Hoppers, Cyclones and Dust Collectors

Standards/Approval:

• OSHA 29 CFR 1910.1200
• GHS Certified
• ABS
• CFIA Approved
• NEHC Certified
• Lloyds Certified

Chemical Composition	Part A: Fibrous Aluminum Oxide, Epoxy Resin, Silicon Carbide, Silicon Dioxide, Magnesium Oxide, Treated Fumed Silica, Neopentyl Glycol Diglycidyl Ether, Titanium Dioxide, Substituted Silane/Part B: Fibrous Aluminum Oxide, Silicon Carbide, Diethylenetriamine, 4,4'-Isopropylidenediphenol, Amine Adduct, Amine Reacted Fatty Acid, Calcium Carbonate, Silicon Dioxide, Manganese Dioxide, Triethylenetetramine, Silane Derivative, Aliphatic Amine
Color	Dark Gray/Tan
Container Size	3 lb
Container Type	Kit
Coverage	740 sq-cm
Curing Time	6 hr
Form	Liquid/Paste
Odor/Scent	Epoxy Part A/Ammoniacal Part B
Series	PC 7226™
Temperature Rating	250 deg F
Type	2-Part
VOC Content	<10 g/L
Manufacturer	Loctite®