Loctite® Nordbak® Pneu-Wear, 25 lb Kit, High Temp, Dark Gray/Gray

Description

Loctite® Nordbak® Pneu-Wear, 2-Part High Temperature, 25 lb, Kit, Liquid/Paste, Dark Gray/Gray, 8.7 sq-ft Coverage, Chemical Composition: Part A: Fibrous Aluminum Oxide, Epoxy Resin, Silicon Carbide, Silicon Dioxide, Magnesium Oxide, Treated Fumed Silica, Neopentyl Glycol Diglycidyl Ether, Titanium Dioxide, Substituted Silane/Part B: Fibrous Aluminum Oxide, Silicon Carbide, Cycloaliphatic Amine, Substituted Amine, Diethylenetriamine, Manganese Dioxide, Silicon Dioxide, 4,4'-Isopropylidenediphenol, Silane Derivative, Phenol, 6 hr Curing, 450 deg F, <10 g/L VOC, Epoxy Part A/Musty Part B

Features:

• High temperature Pneu-wear protects against fine particle abrasion
• 199.4 deg F flash point of part A, 249.8 deg F flash point of part B
• 4:1 mix ratio by volume/by weight
• 30 min work life time
• Must be post-cured for maximum temperature resistance and performance
• Trowelable
• D 90 shore hardness
• 2.2251 specific gravity of part B
• 15000 psi at 77 deg F compressive strength
• Part A: epoxy resin; part B: epoxy hardener

Applications:

Pneumatic Conveying Systems, Exhauster, Chutes and Hoppers, Cyclones and Pulverizing Mills, Elbows, Fan Blades and Housings and Scrubbers

Standards/Approval:

• OSHA 29 CFR 1910.1200
• GHS Certified

Chemical Composition	Part A: Fibrous Aluminum Oxide, Epoxy Resin, Silicon Carbide, Silicon Dioxide, Magnesium Oxide, Treated Fumed Silica, Neopentyl Glycol Diglycidyl Ether, Titanium Dioxide, Substituted Silane/Part B: Fibrous Aluminum Oxide, Silicon Carbide, Cycloaliphatic Amine, Substituted Amine, Diethylenetriamine, Manganese Dioxide, Silicon Dioxide, 4,4'-Isopropylidenediphenol, Silane Derivative, Phenol
Color	Dark Gray/Gray
Container Size	25 lb
Container Type	Kit
Coverage	8.7 sq-ft
Curing Time	6 hr
Form	Liquid/Paste
Odor/Scent	Epoxy Part A/Musty Part B
Temperature Rating	450 deg F
Type	2-Part High Temperature
VOC Content	<10 g/L
Manufacturer	Loctite®