Pillow Block Ball Bearing Unit 2-7/16 in Bore, Timken® RAK2 7/16

Description

Timken®, RAK2 7/16, Pillow Block Ball Bearing Unit, Normal Duty, Series: RAK, 2-7/16 in Bore, 7.406 in Bolt Center-to-Center Length, 2.687 in Base to Bore Centerline, 9.437 in Overall Length, 3-1/16 in Overall Width, 5.406 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.374 in Base Width, Eccentric Locking Device, Shroud Seal, Non-Expansion (Fixed), 11800 lb Dynamic/8080 lb Static Load, 250 deg F, 2470 rpm Maximum, Cast Iron, Uncoated

Features:

• Heavier than our standard block with solid, flat feet for increased strength
• Compact, one-piece housing can be mounted in any position
• Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
• Pre-lubricated and ready for immediate installation
• Grease fitting for relubrication
• All units are supplied with self-locking collar
• RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings

Applications:

Agriculture, Food Processing, Fans, Blowers and Conveyors

Base to Bore Centerline	2.687 in
Base Width	2.374 in
Bolt Center-to-Center Length	7.406 in
Bore Diameter	2-7/16 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	11800 lb Dynamic/8080 lb Static
Locking Device	Eccentric
Material	Cast Iron
Maximum Speed	2470 rpm
Mounting Type	Two-Bolt Base
Overall Height	5.406 in
Overall Length	9.437 in
Overall Width	3-1/16 in
Seal Type	Shroud
Series	RAK
Manufacturer	Timken®