Description
WATTS® Pressure Reducing Valve, Standard Capacity, Series: LFN55B, 2 in Nominal, Solder Union x FNPT, 300 psi, 180 deg F, Media: Water, 8-7/8 in Top to Inlet Center, Brass Body, Elastomer Disc/Thermal Plastic Seat Trim, EPDM
Features:
- Engineered copper silicon body material
- Sealed spring cage for accessible outdoor or waterworks pit installations
- Integral stainless steel strainer removable for cleaning
- Parts are easily and quickly serviceable without removing valve from line
- EPDM diaphragm
- The bypass feature will not prevent the pressure relief valve from opening on the hot water supply system with pressure above 150 psi
- A water saving test program concluded that reducing the supply pressure from 80 to 50 psi (551 to 345 kPa) resulted inch a water savings of 30 Percent
- The wetted surface of this product contacted by consumable water contains less than 0.25 Percent of lead by weight
Applications:
Commercial and Residential
Standards/Approval:
- ASSE 1003
- ANSI A112.26.2
- CSA B356
- IAPMO Listed
- NSF/ANSI 61-G
- PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
Limited
