Description
Leviton® Decora® Vacancy Sensor, 1-Pole, 120/230/277 V AC, 1800 W at 120 V AC/1800 VA at 120 V AC/4000 VA at 277 V AC/1/4 hp at 120 V AC, PIR Sensor, 2100 sq-ft Coverage, 180 deg Viewing, 30 s to 20 min Delay, Fluorescent/Incandescent Lamp, 50/60 Hz Response, 32 to 122 deg F, Light Almond, 4.06 in H x 1.75 in W x 1.85 in D
Features:
- Fits in standard wallbox and replaces single-pole wall switch, gangable with other units, ground connection required
- Low profile design eliminates obtrusive ''scanning-device'' look
- Elegant Decora® wallplates compliment any interior for sleek aesthetics; uses Decora® wallplates and coordinates with Leviton® popular line of Decora® wiring devices
- 180 deg field of view provides approximately 2100 sq-ft of coverage
- Convenient pushbutton provides manual-on/off light switching at any time
- Two dual element PIR sensors used to widen detection range
- Segmented fresnel lens provides optimum sensitivity and performance
- Designed with an extensive ''minor motion'' area where even slight body movements will be detected
- Vandal resistant PIR lens
- Horizontal field of view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Manual-on/auto-off mode for installations where manual-on switching is required but auto-off switching is still desired for CA Title 20/24 and NYC L48 energy savings
- Red LED indicator light flashes when sensor detects motion to verify detection is active
- Time delay in adapting mode, the time delay can be configured from 30 sec (test mode), 5, 10, 20 min, in non-adapting mode, the delay can be configured from 5, 10, 20 and 30 min
- Self-adjusting delayed Off time interval compensates for real time occupancy patterns, preventing unnecessary On/Off switching
- Exclusive walk-through feature provides increased energy savings by not leaving the lights on for an extended period after only momentary occupancy
- Vacancy confirmation when the time out expires and the lights turn Off a 30 sec VACancy confirmation exists to turn the lights back On
- False detection circuitry
- Exclusive Leviton® HIS circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service
- No neutral design is optional for retrofit applications
- One unit can be used for 120 to 277 VAC lighting, compatible with both electronic and magnetic ballasts
Applications:
Commercial, Small Office, Heavier Loads, Private Restrooms, Lounges, Storage Areas, Classrooms and Conference Rooms
Standards/Approval:
- FCC Compliant
- NAFTA Compliant
- NOM Certified
- Title 24/20 and NYC L48 Compliant
- UL Listed
- cUL Listed
