Description
Leviton® Decora® Vacancy Sensor, 1-Pole, 120/230/277 V AC, 120/280 mW, PIR Sensor, 2100 sq-ft Coverage, 180 deg Viewing, 30 s to 20 min Delay, Fluorescent/Incandescent Lamp, 50/60 Hz Response, Manual On/Automatic Off Control Output, 0 to 50 deg C, Ivory, 46 in H x 1.75 in W x 1.85 in D
Features:
- Fits in standard wallbox and replaces 1-pole wall switch, ground connection required, gangable with other units
- Low profile design eliminates obtrusive scanning device look
- Elegant Decora® wallplates compliment any interior for sleek aesthetics, uses Decora® wallplates and coordinates with Leviton® popular line of Decora® wiring devices
- 180 deg field of view provides approximately 2100 sq-ft of coverage
- Convenient pushbutton provides manual ON/OFF light switching at any time
- Two dual element PIR sensors used to widen detection range
- Segmented fresnel lens provides optimum sensitivity and performance
- Designed with an extensive ''minor motion'' area where even slight body movements will be detected
- Vandal resistant PIR lens
- Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Manual ON/auto OFF mode for installations where manual ON switching is required but auto OFF switching is still desired for ca title 20/24 and NYC L48 energy savings
- Red LED indicator light flashes when sensor detects motion to verify detection is active
- Time delay in adapting mode, the time delay can be configured from 30 sec (test mode), 5, 10 and 20 min in non-adapting mode, the delay can be configured from 5, 10, 20 and 30 min
- Self-adjusting delayed OFF time interval compensates for real time occupancy patterns, preventing unnecessary ON/OFF switching
- Exclusive Walk-through feature provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy
- Vacancy confirmation when the time out expires and the lights turns OFF, a 30 sec vacancy confirmation exists to turn the lights back ON
- False detection circuitry
- Exclusive Leviton® high inrush stability (HIS) circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service
- No neutral design is optional for retrofit applications
- 1-unit can be used for 120 to 277 VAC lighting, compatible with both electronic and magnetic ballasts
Applications:
Small Office, Heavier Loads, Private Restrooms, Lounges, Storage Areas, Classrooms, Conference Rooms and Commercial Applications
Standards/Approval:
- UL/cUL Listed
- FCC Approve
- NOM Certified
- NAFTA Compliant
- Title 24/20 Compliant
- NYC L48
Warranty:
5 Years Limited
