Solenoid Control Valve, 2 in, 250 psi, WATTS Mustang LFM113-12

Description

WATTS® Solenoid Control Valve, On-Off Globe Pattern, Series: Mustang LFM113-12, 2 in Nominal, Flanged, 250 psi, 150 lb, 160 deg F, Media: Water, Manual Operator Actuator, 9-3/8 in Inlet to Outlet Length, 6-1/2 in Top to Inlet Center, Ductile Iron Body, EPDM Disc/Stainless Steel Seat Trim, Buna-N, Fusion Bonded Epoxy Coated

Features:

• Provisions for manual operation in the event of a power outage
• Opens and closes as controlled by a 3-way solenoid pilot
• Stainless steel tubing/fittings
• Flow clean strainer
• Buna-N seat gasket/diaphragm/elastomer and fiber spacer washer
• Seat gasket, seat disc, spacer washer, diaphragm contained in main valve repair kit
• The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight

Standards/Approval:

• ASTM A536 65-45-12 Body
• ASTM A276 Stem
• ASTM A276 Spring
• NSF 61 Finish
• PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Warranty:

Limited

Actuator Type	Manual Operator
Body Material	Ductile Iron
End Style	Flanged
Finish	Fusion Bonded Epoxy Coated
Inlet to Outlet Length	9-3/8 in
Media	Water
Nominal Size	2 in
Pressure Class	150 lb
Pressure Range	250 psi
Series	Mustang LFM113-12
Softgoods Material	Buna-N
Temperature Rating	160 deg F
Top to Inlet Center	6-1/2 in
Trim Material	EPDM Disc/Stainless Steel Seat
Type	On-Off Globe Pattern
Manufacturer	WATTS®