The DC Motor Direct Damper Actuator MS4120F1006/U from NEUCO INC is engineered for precise control of damper positions in HVAC systems. This actuator operates on direct current, providing reliable performance in various applications. Its compact design allows for easy installation in tight spaces, while the robust construction ensures long-lasting durability. The actuator is compatible with a range of dampers, making it versatile for different setups. With a focus on energy efficiency, this actuator helps optimize airflow and improve system performance, adhering to industry standards for quality and reliability.
Commercial Building Controls : Dampers and Damper Actuators : Fire and Smoke Damper Actuators : 120 Vac Fire/Smoke Actuators : 80 lb-in. 120V : MS4120F1006/U
Honeywell fast-acting, spring-return, two-position 175 lb-in., 20 Nm, actuator
Overview
The Honeywell Fast-Acting, Two-Position Actuators are line volt (120V), 80 lb-in., spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). The actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation.
Features
- 80 lb-in. (5.9 Nm) minimum driving torque at 350 F (176 C)
- Reversible mounting facilitates use in either clockwise (cw) or counterclockwise (ccw) spring rotation
- Integral spring return ensures level of return torque
- Fifteen-second spring return timing
- No special cycling required during long-term holding
- No audible noise during holding
- Patent pending design eliminates need for limit switches to reduce power consumption
- Models available for 24, 120, and 230 Vac
- Ninety-five degree angle of rotation
- Actuator holds rated torque at reduced power level
- Die-cast aluminum housing
- Housing design allows flush mounting to damper
- Designed to operate reliably in smoke control systems requiring Underwriters Laboratories Inc. UL555S ratings up to 350 F
- Models available with SPST position-indicating switches (7 degree, 85 degree stroke)
Product Specifications
- Application
- Fire and Smoke
- Dimensions (in.)
- 10.67 in high x 3.94 in wide x 2.95 in deep
- Dimensions (mm)
- 271 mm high x 100 mm wide x 75 mm deep
- Includes
- Self-centering shaft adapter, 3mm crank
- Weight (lb)
- 8 lb
- Weight (kg)
- 3.63 kg
- Materials
- Aluminum housing
- Comments
- Two integral 3/8 in. flexible conduit connections
- Item Type
- Product
- Mounting
- Direct Coupled
- Frequency
- 60 Hz
- Approvals, Underwriters Laboratories Inc.
- UL873, Plenum Rated
- Electrical Connections
- Teflon-jacketed cable
- Operating Humidity Range (% RH)
- 5 to 95% RH, non-condensing
- Supply Voltage
- 120 Vac 10%
- Power Consumption
- Driving-- 0.35A, 35W, Holding-- 0.15A, 10W
- Shipping and Storage Temperature Range (F)
- -40 F to +140 F
- Shipping and Storage Temperature Range (C)
- -40 C to +60 C
- Approvals, CE
- 89/336/ECC, 73/23/EEC
- Approvals, Canadian Underwriters Laboratories Inc.
- cUL C22.2 No. 24-93
- Ambient Temperature Range (F)
- -40 F to +130 F
- Ambient Temperature Range (C)
- -40 C to +55 C
- Regulatory Compliance Mark
- N314
- Environmental, Electrical or Ingress Protection Rating
- NEMA 2; IP54
- Internal Auxiliary Switch
- 0
- Maximum Noise Rating
- Driving (dB(A) @ 1m)-- 70; Holding (dB(A) @ 1m)-- 20 (no audible noise)
- Stroke
- 95 3 degrees
- Shaft Dimensions (in.)
- 3/8 to 1.06 in. round or 3/8 to 11/16 in. square
- Actuator Type
- Damper
- Control Signal
- Two position; SPST
- Fail Safe Mode
- Spring Return
- Torque Rating (lb-in.)
- 175 lb-in.
- Torque Rating (Nm)
- 20 Nm
- Spring Return Torque/Force (lb-in., lbf)
- 175 lb-in.
- Spring Return Torque/Force (Nm, N)
- 20 Nm
- Additional Torque Ratings (lb-in.)
- Maximum Stall-- 425 lb-in.; Minimum Driving at 350 F-- 175 lb-in.
- Additional Torque Ratings (Nm)
- Maximum Stall-- 48 Nm; Minimum Driving at 175 C-- 20 Nm
- External Auxiliary Switches Available
- No
- Timing, Nominal
- Driving @ 60 Hz (sec)-- 15 sec
- Spring Return Timing
- Maximum-- 15 sec
- Shaft Adapter Type
- Self-centering clamping
- Manual operation
- Manual crank
- Shaft Dimensions (mm)
- 10 to 27 mm round or 10 to 18 mm square
- Spring Return Direction
- By orientation
- Electrical Connections (in.)
- 40 in.
- Electrical Connections (mm)
- 1 m
