WATTS® Float Control Valve, 4 in, 250 psi, Mustang LFM110-14

Description

WATTS® Float Control Valve, On-Off Globe Pattern, Series: Mustang LFM110-14, 4 in Nominal, Flanged, 250 psi, 150 lb, 160 deg F, Media: Water, 15 in Inlet to Outlet Length, 10-5/8 in Top to Inlet Center, Ductile Iron Body, 316 Stainless Steel Trim/Stainless Steel Stem/Stainless Steel Spring Trim, Buna-N/Fiber, Fusion Bonded Epoxy Coated

Features:

• Copper tubing/brass fitting
• Valve open is commanded by the float control pilot
• Opens and closes to correspond with high and low lever set points
• Allows a calculated "draw-down" of water level to increase tank circulation
• Buna-N seat gasket/diaphragm/elastomer and fiber spacer washer
• Seat gasket, seat disc, spacer washer, diaphragm contained in main valve repair kit
• The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight

Standards/Approval:

• ASTM A536 65-45-12 Body
• ASTM A276 Stem
• ASTM A276 Spring
• NSF 61 Finish
• PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Warranty:

Limited

Body Material	Ductile Iron
End Style	Flanged
Finish	Fusion Bonded Epoxy Coated
Inlet to Outlet Length	15 in
Media	Water
Nominal Size	4 in
Pressure Class	150 lb
Pressure Range	250 psi
Series	Mustang LFM110-14
Softgoods Material	Buna-N/Fiber
Temperature Rating	160 deg F
Top to Inlet Center	10-5/8 in
Trim Material	316 Stainless Steel Trim/Stainless Steel Stem/Stainless Steel Spring
Type	On-Off Globe Pattern
Manufacturer	WATTS®