Pillow Block Ball Bearing Unit, Timken® YAK1 3/4 SGT, 1-3/4 in Bore

Description

Timken®, YAK1 3/4 SGT, Pillow Block Ball Bearing Unit, Normal Duty, Series: YAK, 1-3/4 in Bore, 5.874 in Bolt Center-to-Center Length, 2.063 in Base to Bore Centerline, 7.531 in Overall Length, 1-15/16 in Overall Width, 4.126 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.063 in Base Width, Set Screw Locking Device, Shroud Seal, Non-Expansion (Fixed), 7350 lb Dynamic/4600 lb Static Load, 250 deg F, 3230 rpm Maximum, Cast Iron, Uncoated

Features:

• Incorporates shaft guarding technology, which reduces replacement time, provides shaft protection and prolongs the life of the shaft
• Heavier than our standard block with solid, flat feet for increased strength
• Timken® series low-base set screw pillow blocks feature the GY-KRRB bearing
• Well-suited for industrial applications with normal loads due to its full-width inner-ring set screw
• All units are supplied with setscrew and shaft guarding technology

Applications:

Agriculture, Food Processing, Fans, Blowers and Conveyors

Base to Bore Centerline	2.063 in
Base Width	2.063 in
Bolt Center-to-Center Length	5.874 in
Bore Diameter	1-3/4 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	7350 lb Dynamic/4600 lb Static
Locking Device	Set Screw
Material	Cast Iron
Maximum Speed	3230 rpm
Mounting Type	Two-Bolt Base
Overall Height	4.126 in
Overall Length	7.531 in
Overall Width	1-15/16 in
Seal Type	Shroud
Series	YAK
Manufacturer	Timken®