Description
Leviton® Decora® Vacancy Sensor, 1-Pole, 120/230/277 V AC, 800 W at 120 V AC/1200 VA at 120 V AC/2700 VA at 277 V AC/1/4 hp at 120 V AC, PIR/Ultrasonic Sensor, 2400 sq-ft Coverage, 180 deg Viewing, 30 s to 30 min Delay, Fluorescent/Incandescent Lamp, 50/60 Hz Response, 32 to 104 deg F, Light Almond, 4.06 in H x 1.75 in W x 1.85 in D
Features:
- Fits in standard wallbox and replaces single-pole wall switch, gangable with other units
- Low profile design eliminates obtrusive ''scanning-device'' look
- Elegant Decora® wallplates compliment any interior for sleek aesthetics; uses Decora® wallplates and coordinates with Leviton® popular line of Decora® wiring devices
- Convenient pushbutton provides manual-on/off light switching at any time
- Segmented fresnel lens provides optimum sensitivity and performance
- Designed with an extensive ''minor motion'' area where even slight body movements will be detected
- Vandal resistant PIR lens
- Horizontal field of view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Manual-on/auto-off mode for installations where manual-on switching is required but auto-off switching is still desired for CEC Title 24 energy savings
- LED indicator light flashes when sensor detects motion to verify detection is active
- The delayed Off time is preset at 30 min in the auto-adapting mode
- Time delay adjustment for delayed Off time settings of 30 sec (for walking test), 10, 20 and 30 min for fixed time and auto-adapting
- Self-adaptive technology callbacks for adjustment are eliminated
- Time delay and sensitivity settings are continually adjusted to occupant patterns of use in auto adapt mode
- Vacancy confirmation when the time out expires and the lights turn Off a 30 sec VACancy confirmation exists to turn the lights back On
- False detection circuitry
- Small motion sensitivity (U/S) ultrasonic technology provides excellent minor motion sensitivity
- Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
- Exclusive Leviton® HIS circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service
- Without neutral wire
Applications:
Commercial, Retrofit, Private and Executive Office, Conference Rooms, Storage Areas, Restrooms, Classrooms, Lounges and Training Areas
Standards/Approval:
- CEC Certified
- ETL/cETL Listed
- FCC Compliant
- NAFTA Compliant
- UL Listed
- cUL Listed
- Title 20 and NYC L48 Compliant
