EATON Soft Starter, S801 Series, 200-600 V AC, 360 A, 3 Pole

Description

EATON Soft Starter, Non-Combination Severe Duty, Series: S801, 200 to 600 V AC, 360 A, 47 to 63 Hz Frequency, 220 kW Wattage, 200 hp, 300 hp Motor, 21.6/26.4 VAC Coil, 3 Pole, 0.5 to 180 s Timing, 3 ph, Lug Connection, Solid-State Overload Relay, IP20 Enclosure, Starting Modes: Current Limit/Ramp, -30 to 50 deg C Operating, 23-1/2 x 16-1/2 x 11-1/2 in Dimensions

Features:

• Built-in overload protection, run bypass contactor
• Adjustable ramp times, torque control, kick start control
• Programmable overload settings, 31 to 100% (3.2:1) of rated current for the unit
• Physically fits in place of most NEMA and IEC starters
• Easy to use control interface module, 6 SCRs control
• Reduced wear on belts, gears, chains, clutches, shafts and bearings
• Allows for controlling the inrush current to the motor
• Reduced inrush current leads to more stable power grid and can lower peak demand charges
• Elimination of water hammer in pumping applications
• Less shock to product on conveyor lines and material handling gear
• 24 VDC control module enhances personnel and equipment safety

Applications:

Electrical Assemblies, Panels and EOEMs Applications

Standards/Approval:

• Contact Manufacturer

Amperage Rating	360 A
Coil Voltage	21.6/26.4 V AC
Connection Type	Lug
Dimensions	23-1/2 x 16-1/2 x 11-1/2 in
Enclosure Type	IP20
Frequency Rating	47 to 63 Hz
Motor Power	200 hp, 300 hp
Number of Poles	3
Operating Temperature	-30 to 50 deg C
Overload Relay	Solid-State
Phase	3
Series	S801
Starting Modes	Current Limit/Ramp
Timing	0.5 to 180 s
Type	Non-Combination Severe Duty
Voltage Rating	200 to 600 V AC
Wattage	220 kW
Manufacturer	EATON