Description
Bradford White®, LE120L3-3, Water Heater, Light Duty, 19 gal Tank, 240 V, 4500 W Power, 3 ph, 3/4 in NPT Water Connection, Magnesium Anode Rod Heating Element, 18 gph Recovery Rate, 150 psi Pressure, 180 deg F, ASME: No, Steel, Vitraglas®, 18 in Dia x 24-3/4 in H Dimensions
Features:
- Applications-Lowboy models are ideal for installations where space is minimal and are perfect for tight installations such as a closet or under a counter
- Fully Automatic Thermostat Controls-Fast acting surface-mount thermostats with a maximum setpoint of 175°F and a high limit energy cutoff (manual reset) for safety
- Direct Heat Transfer With Immersed Elements-Transfers heat directly and efficiently to the water. Screw-in style
- Factory-Installed Hydrojet® Total Performance System-Sediment build-up reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank
- Vitraglas® Lining-An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600°F (871°C)
- Insulation System-1" (25mm) Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity. Blanketed models additionally use a supplied flexible fiberglass insulation blanket
- Water Connections-3/4" (19mm) NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections
- Factory-Installed Heat Traps-Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
- Protective Magnesium Anode Rod-Provides added protection against corrosion for long-term, trouble-free service
- Steel Tank-Heavy gauge steel automatically formed, rolled, and welded
- Field Convertible-Units are shipped from factory standard Three Phase, Non-Simultaneous and can be converted to Single Phase and/or Simultaneous operation in the field
- Field Conversion Kits-Change voltage and kW in the field
- T&P Relief Valve Installed-Side T&P is standard. Optional top T&P location is available and must be specified when ordering
Applications:
Commercial
Standards/Approval:
- AHRI Certified
- cETLus Listed
- CSA Certified
- CSAE Certified
Warranty:
3/5 Years Limited
