WATTS® Quarter-Turn Ball Valve, 3/4 in, 600 psi, Chrome Plated Brass

Description

WATTS® Quarter-Turn Ball Valve, 2-Piece, Series: B6001, 3/4 in Nominal, Solder End Style, 600 psi Pressure, 0 to 450 deg F, Standard Port, Media: Gas/Liquids, 11/16 in Orifice, Chrome Plated Brass Ball, 3-5/16 in Inlet to Outlet Length, 2 in Top to Inlet Center, Cast Bronze Body, Brass Stem and Uniseal® Seat Trim, PTFE Softgoods

Features:

• Chrome plated brass ball is wiped clean during each operation of the valve


• Minimal pressure drop due to large ports


• Blow-out proof, pressure retaining stem


• High cycle life reinforced PTFE stem packing seal and thrust washer


• Vinyl insulator on heavy duty, zinc plated carbon steel handles


• Quarter-turn open or close operation


• Low operating torque


• Each valve factory tested


• 150 psi working steam pressure


• This valve is designed to be soft soldered into lines without disassembly, using a low temperature solder to 420 deg f


• PTFE stem packing seal

Applications:

Commercial and Industrial Applications

Standards/Approval:

• ASTM-B88


• CW510L Ball/Stem


• CW511L Body/End Connection


• NSF/ANSI 61 Annex G Certified


• UL Listed

Warranty:

1 Year Limited

Ball Material	Chrome Plated Brass
Body Material	Cast Bronze
End Style	Solder
Inlet to Outlet Length	3-5/16 in
Media	Gas/Liquids
Nominal Size	3/4 in
Orifice Size	11/16 in
Port Type	Standard
Pressure Rating	600 psi
Series	B6001
Softgoods Material	PTFE
Temperature Rating	0 to 450 deg F
Top to Inlet Center	2 in
Trim Material	Brass Stem and Uniseal® Seat
Type	2-Piece
Manufacturer	WATTS®