Description
NIBCO®, NJ8300E, Ball Valve, 2-Piece, Series: S-580-70, 2-1/2 in Nominal, Solder End Style, 600 psi Pressure, 400 deg F, Standard Port, Media: Air/Gas/Steam/Water, 1/2 in Orifice, Standard Lever Actuator, Brass Ball, 7.28 in Inlet to Outlet Length, 3-1/2 in Top to Inlet Center, Bronze Stem Trim, PTFE Softgoods, 10.38 in L Dimensions, Domestic
Features:
- Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
- Maximum temperature rating 400 deg F
- Conventional port
- Stainless steel ball and stem
- Vented ball
- Blowout-proof stem
- Dezincification resistant
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- The valve's reinforced PTFE seat ring and brass hard chrome plated ball exhibit high chemical resistance properties, and is recommended for many high pressure applications
- The valve may be used for isolation and throttling (half open to full open only)
Applications:
Commercial and Light Industrial
Standards/Approval:
- MSS SP-110
- ASTM B371 UNS C69430/B99 UNS C65100/B124 UNS C37700/B16 UNS C36000/B584 UNS C84400
- PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Warranty:
5 Years Limited
