Anvil® Pipe Support Bracket, 3/4 in Rod Dia, Carbon Steel, Black Oxide

Description

Anvil® Pipe Support Bracket, Light Welded, Series: FIG 194, 13/16 in, 3/4 in Rod Dia, 750 lb, 5/16 in Thickness, Carbon Steel, Black Oxide, 9 in L x 2 in W x 9 in H, Domestic

Features:

• Ends of bracket are drilled to accept hanger rods up to 3/4".
• For support from below or above bracket
• Bracket may be installed either in position illustrated or reversed
• Ends of bracket are drilled to accept hanger rods up to 3/4 in
• Installation: when bolted to a wall, an additional back plate may be required of such thickness and size as to properly distribute the weight over the wall, size and thickness of the back plate is governed by the load to be carried and the nature and conditions of the wall and back plates furnished upon request
• Bracket no: 1

Standards/Approval:

• ANSI/MSS SP-69/SP-58 (Type 31)
• Federal Specification A-A-1192A (Type 31)
• FM Approved/WW-H-171-E (Type 32)

Dimensions	9 in L x 2 in W x 9 in H
Domestic/Import	Domestic
Finish	Black Oxide
Hole Size	13/16 in
Load Capacity	750 lb
Material	Carbon Steel
Rod Diameter	3/4 in
Series	FIG 194
Thickness	5/16 in
Type	Light Welded
Manufacturer	Anvil®