Description
Honeywell Damper Actuator, Non-Spring Return, 24 VAC, 70 in-lb, 90 s Motor Timing, Direct Coupled Mount, Steel/Plastic, 3.39 in W x 3 in D x 5.55 in H, Import
Features:
- 50/60 Hz frequency
- 39 in appliance cable electrical connections
- 5 to 95% RH operating humidity, non-condensing
- 5.4 VA driving power consumption
- 20 to 130 deg F shipping and storage temperature
- 20 to 125 deg F ambient temperature
- Environmental, electrical or ingress protection rating: NEMA 1, IP54
- No internal auxiliary switch
- Maximum noise rating: Driving - 45 dB(A) at 1 m
- 90 deg stroke
- 3/8 to 1/2 in square or round shaft
- Control signal: 2 to 10 VDC, 4 to 20 mA
- Fail safe mode: Non-Spring return
- Additional torque ratings: Maximum stall - 130 lb-in
- Rotation to open: By switch
- Rotational stroke adjustment: Mechanically limited at 45 or 60 deg in CW or CCW directions
- Aluminum hub, (2) set screws shaft adapter
- Declutch mechanism manual operation
- 10 to 13 mm square/round shaft
- Input impedance: 45 kOhm (2 to 10 VDC signal), 536 Ohm (4 to 20 mA signal)
Applications:
HVAC Applications
Standards/Approval:
- CE/ECC 89/336
- C-Tick N314
- EEC 73/23
