The 24v 2 Position Damper Actuator with Arm is designed for efficient airflow management in HVAC systems. This actuator operates on a 24V power supply, making it suitable for low-voltage applications. It includes an arm for easy installation and compatibility with various damper types. The actuator ensures precise control of air distribution, enhancing the overall efficiency of heating and cooling systems. Ideal for both residential and commercial use, it is a reliable choice for effective climate control.
Commercial Building Controls : Dampers and Damper Actuators : Kit-Mounted Motors : M847 : M847A1072/U
Foot Mounted Actuator
Overview
Two-Position Draft Damper Actuators. Use with two-wire 24V room thermostats or other low voltage controllers to operate the draft damper on solid fuel furnaces or boilers and other similar light duty applications.
Features
- Low voltage, spring-return damper actuator.
- Equipped with mounting bracket for wall, duct or direct appliance mounting to control draft damper through an actuator arm or chain linkage arrangement.
- Actuator wheel rotates in a clockwise direction (when facing the wheel) when energized.
Product Specifications
- Dimensions (in.)
- 3 1/2 in. high x 2 5/8 in. wide x 3 5/16 in. deep
- Dimensions (mm)
- 89 mm high x 66 mm wide x 84 mm deep
- Includes
- 3.8 in. linkage arm
- Weight (lb)
- 1.75 lbs
- Item Type
- Product
- Mounting
- Foot mounted. Direct Coupled
- Frequency
- 60 Hz
- Operating Humidity Range (% RH)
- 5 to 95% RH
- Supply Voltage
- 24 Vac
- Operating Temperature Range (F)
- 40 F to 125 F
- Operating Temperature Range (C)
- 5 C to 50 C
- Timing
- Run Time Maximum-- 20 sec
- Stroke
- Angle of Rotation-- 45 degrees maximum
- Control Signal
- Two position, SPST
- Fail Safe Mode
- Spring Return
- Torque Rating (lb-in.)
- 1.9 lb-in.
- Torque Rating (Nm)
- 0.21 Nm
- External Auxiliary Switches Available
- No
- Motor shafts
- 1, Round
