Description
T&B® Industrial Fitting Plastic Bullet® Liquid Tight Conduit Connector, Flexible, 1/2 in Trade, 90 deg Angle, For Use With: Type B Flexible Non-Metallic Liquid Tight Conduit, Type TB LTC050 Or LTC050 to 1 Conduit, Thermoplastic, Electro-Plated Zinc, 1.489 in L Dimensions
Features:
- Fitting assembles to conduit without disassembly and is designed to be installed with positive installation criteria (gland bottoms on body shoulder)
- Rugged low profile non-metallic body and gland construction, the fitting is equipped with a steel locknut to firmly secure fitting to box or an enclosure and a sealing O-ring
- Captive sealing O-ring with predetermined compression for a reliable seal at enclosure
- Fitting ferrule designed to accept variations in conduit inside diameter and is tolerant of field conduit cuts
- Ferrule profile designed to reduce friction between conduit ID and ferrule allowing conduit to seat properly for an effective seal
- Performance of fittings tested to simulate adverse installation conditions
- Performance of fitting unaffected by exposure to detergents, cleaners and sanitizers commonly encountered in food processing plants and typical industrial environment, also unaffected by cutting fluids, wiring pulling compounds and marine environment
- Meets industry standards for cold impact and simulated hammer blow
- Weather stabilized thermoplastic material
- IP66 and IP68 at 2 m
Applications:
For tubing to a box or enclosure with knockout opening or threaded hub
Standards/Approval:
- ANSI Specified
- Class I Zone 2 or Class I Division 2
- CSA C22.2 File No. 227.2
- CSA C22.2 File No. 227.3
- Federal Specification H-28
- Rule 18-202 (4) (b) Class II Division 1
- Rule 18-252 (4) Class II Division 2
- Rule 18-302 (4) Class III Division 1
- UL 514B
- UL94 V-2 Flammability Rated
