Description
T&B® Bullet® Conduit Connector, 3/4 in, 45 deg, For Use With: Type B Liquid Tight Flexible Non-Metallic Conduit Fitting, Thermoplastic, Electro-Plated Zinc, 2.452 in L
Features:
- Fitting assembles to conduit without disassembly and is designed to be installed with positive installation criteria (gland bottoms on body shoulder)
- Rugged low profile non-metallic body and gland construction, the fitting is equipped with a steel locknut to firmly secure fitting to box or an enclosure and a sealing “O” ring
- Captive sealing O-ring with predetermined compression for a reliable seal at enclosure
- Fitting ferrule designed to accept variations in conduit inside diameter and is tolerant of field conduit cuts
- Ferrule profile designed to reduce friction between conduit I.D. and ferrule allowing conduit to seat properly for an effective seal
- Performance of fittings tested to simulate adverse installation conditions
- Performance of fitting unaffected by exposure to detergents, cleaners, and sanitizers commonly encountered in food processing plants and typical industrial environment, also unaffected by cutting fluids, wiring pulling compounds and Marine environment
- Meets industry standards for cold impact and simulated hammer blow
Applications:
For tubing to a box or enclosure with knockout opening or threaded hub
Standards/Approval:
- CSA C22.2 File No. 227.2
- CSA C22.2 File No. 227.3
- UL 514B
- UL94-V2 Flammability
- Federal Standard H-28, Class I, Zone 2 or Class I, Div 2, Rule 18-202 (4) (b) Class II, Div 1, Rule 18-252 (4) Class II, Div 2, Rule 18-302 (4) Class III, Div 1
Warranty:
2 Years
