Description
Zoeller® Submersible Pump, Single Seal, Series: Flow-Mate 98, 72 gpm, 1-1/2 in NPT Outlet, 23 ft Maximum Head, 1/2 hp, 115 VAC, 9.4 A, 60 Hz, 1 ph, 1725 rpm Motor, Non-Clogging Vortex Impeller, 130 deg F, Cast Iron, 10-1/8 in W x 12 in H
Features:
- Corrosion-resistant, powder coated epoxy finish
- Cast iron switch case, motor, pump housing and base
- No steel sheet metal parts to rust or corrode
- All castings are cast iron class 25-30 25000 lb tensile strength
- Stainless steel screws, guard, handle, arm and seal assembly
- Float-operated 2-pole mechanical switch
- Permanent split capacitor motor, oil filled and hermetically-sealed, automatic reset thermal overload protection
- Upper and lower oil-fed cast iron bearing
- Carbon and ceramic shaft seal
- Entire unit pressure-tested after assembly
- Watertight neoprene square ring between motor and pump housing
- Passes 1/2 in spherical solids
- No screens to clog
- 1-1/2 in NPT discharge (1-1/2 x 2 in PVC adapter included with BN and BE Models)
- Packaged systems available
- For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump
- 9-1/2 in on point, 3 in off point
Applications:
Water Transfer, Sump and Effluent Systems, Light Commercial, New Sump and Residential Construction
Standards/Approval:
- CSA Certified
- SSPMA Standard
- UL Listed
