Description
Zoeller® Submersible Pump, Automatic, Series: M95, 80 gpm, 1-1/2 in NPT Outlet, 26 ft Maximum Head, 115 VAC, 10.5 A, 1 ph ph, 130 deg F, 1/2 hp, Non-Clogging Vortex Impeller, 3-Wire Cord, Upper Sleeve/Lower Ball Bearing, 1/2 in Maximum Diameter of Solids, Cast Iron, Green, Powder Epoxy Coated, 10-1/8 in W x 12-1/8 in H Dimensions, Domestic
Features:
- Corrosion resistant, powder coated epoxy
- Cast iron switch case, motor, pump housing and base
- FKM outer switch boot
- No sheet metal parts to rust or corrode
- All castings are cast iron class 25 to 30 25000 lb tensile strength
- Stainless steel screws, guard, handle, arm and seal assembly
- Float-operated, submersible, 2-pole mechanical switch integrating advanced switch technology
- Permanent split capacitor motor, oil filled and hermetically-sealed, automatic reset thermal overload protection
- Bearings - upper and lower oil-fed cast iron
- Carbon and ceramic shaft seal
- Entire unit pressure-tested after assembly
- Watertight neoprene square ring between motor and pump housing
- No screens to clog
- Oil filled cooling
- Auto reset thermal overload motor protection
- Engineered thermoplastic impeller
- Stainless steel hardware and neoprene gasket
- Automatic models include a float-operated, 2-pole mechanical switch, a stainless steel float guard and switch arm, and a solid, buoyant polypropylene float, which prevents water from filling the float and causing a malfunction and a stainless steel handle for easy installation and removal
- All models are hermetically sealed to be watertight, dust-tight, and completely submersible
Applications:
Dewatering Sump Systems, Water Transfer, Light Commercial, New Sump and Residential Construction
Standards/Approval:
- AISI 1215 Motor Shaft
- cCSAus Certified
- CSA Certified
- C22.2 #108
- SSPMA Certified
- UL 778
