Description
Zoeller® Submersible Pump, Single Seal, Series: Mighty-Mate 50, 43 gpm, 1-1/2 in NPT Outlet, 19-1/4 ft Maximum Head, 1/3 hp, 115 VAC, 9.7 A, 60 Hz Frequency, 1 ph ph, 1550 rpm Motor, 3-Wire Cord, Non-Clogging Vortex Impeller, 130 deg F, Sleeve Bearing, Cast Iron, 10-3/32 in W x 10-1/16 in H Dimensions
Features:
- Float-operated, submersible, 2-pole mechanical switch and variable level, long-cycle systems
- Corrosion-resistant, powder coated epoxy finish
- No steel sheet metal parts to rust or corrode
- Stainless steel screws, guard, handle and switch arm
- No screens to clog
- Watertight neoprene square ring between motor and pump housing
- Solid, buoyant, polypropylene float
- oil filled, hermetically-sealed, automatic reset thermal overload protected motor
- Upper and lower sleeve bearings running in bath of oil
- Entire unit pressure-tested after assembly
- Carbon and ceramic shaft seal
- Passes 1/2 in spherical solids
- Watertight and dust-tight
- Permanently oiled bearings
- 7-1/4 in on point, 3 in off point
- All bronze construction
- Stainless steel guard and handle
- Lower and upper bearings, oil-fed cast iron
- Bronze impeller
- Submersible pump for dewatering (sump) or effluent (septic tank systems)
Applications:
Water Transfer, Sump and Effluent Systems, Light Commercial, New Sump and Residential Construction
Standards/Approval:
- CSA Certified
- SSPMA Standard
- UL Listed
