Description

Zoeller® Submersible Effluent Pump, Single Seal, Series: High Head Flow-Mate 160, 100 gpm Maximum, Non-Automatic, 1-1/2 in NPT Outlet, 86-1/2 ft Maximum Head, 1/2 hp, 230 VAC, 10.2 A, 60 Hz Frequency, 1 ph ph, 3450 rpm Motor, 3-Wire Neoprene Cord, Bronze Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 12-3/4 in W x 19-5/16 in H Dimensions

Features:

• Durable, cast iron constructed switch case, base, motor and pump housing
• Cast iron class 25 to 30 (25000X tensile strength)
• Impeller bronze class 85-5-5-5
• Corrosion resistant, powder coated epoxy
• Oil filled, hermetically-sealed, automatic reset thermal overload protected motor
• Upper and lower ball bearings running in bath of oil
• Carbon and ceramic shaft seal
• No screens to clog
• Neoprene square ring and gasket
• Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
• Passes 3/4 in (19 mm) spherical solids
• On point - 14-3/4 in, off point - 5 in
• 100% of units are computerized tested

Applications:

Onsite/Septic, Enhanced Flow Step Systems and Commercial Dewatering

Standards/Approval:

• cCSAus Certified
• SAE 1117 Carbon Steel Motor Shaft
• SSPMA Certified
• UL Listed

Amperage Rating	10.2 A
Automatic/Non Automatic	Non-Automatic
Bearing Type	Ball
Cord Type	3-Wire Neoprene
Dimensions	12-3/4 in W x 19-5/16 in H
Frequency Rating	60 Hz
Horsepower	1/2 hp
Impeller Type	Bronze Non-Clogging Vortex
Material	Cast Iron
Maximum Flow Rate	100 gpm
Maximum Head	86-1/2 ft
Motor Speed	3450 rpm
Outlet Size	1-1/2 in NPT
Phase	1 ph
Series	High Head Flow-Mate 160
Temperature Rating	130 deg F
Type	Single Seal
Manufacturer	ZOELLER PUMP COMPANY