Description
Zoeller® Submersible Effluent Pump, Single Seal, Series: X160, 100 gpm Maximum, Automatic, 1-1/2 in NPT Outlet, 56 ft Maximum Head, 1/2 hp, 115 VAC, 15.5 A, 60 Hz Frequency, 1 ph ph, 3450 rpm Motor, SOOW 5-Wire Cord, Bronze Non-Clogging Vortex Impeller, 104 deg F, Ball Bearing, Cast Iron, 13-5/16 in W Dimensions
Features:
- FM listed motor for class I, division 1, group C and D locations
- Non-clogging vortex impeller design, bronze class 88-8-0-4
- Stainless steel rotor shaft
- Durable, cast construction - cast iron cover, motor adapter and pump housing, all cast iron class 30, 30000 lb tensile strength
- 20 in, UL listed, 5-wire (1 ph) or 8-wire (3 ph) neoprene cord
- Sensor leads and power leads in one cord for easy installation
- Stainless steel plate, bolts, handle, guard and float rod, guide, switch arm and actuator assembly
- Brass float and float rod (automatic only)
- 1-1/2 in NPT conduit connection for protecting cords in extra heavy duty applications
- Moisture sensors pre-wired in motor housing (functionality requires indicator in panel)
- Zoeller® control panel with intrinsically-safe relays and moisture indicator is required with non-automatic units
- Motor is hermetically-sealed, automatic reset thermal overload protected(3 Ph requires circuit in control panel)
- Effluent or dewatering maximum temperature of 104 deg F
- Shaft seal made of stainless steel wetted parts, carbon and ceramic rotary face seal
- Upper and lower ball bearings running in bath of oil
- Neoprene square ring seals
- All models pass 3/4 in spherical solids
- On point - 19-1/2 in, off point - 9-3/4 in
- 100% computerized testing and 100% tested submerged in water
- Corrosion resistant, powder coated epoxy finish with stainless steel screws and handle
Applications:
Onsite/Septic, Enhanced Flow Step Systems, Commercial Dewatering and Sump/Dewatering Applications
Standards/Approval:
- cCSAus Certified
- FM Approved
- SSPMA Certified