Description
Zoeller® Submersible Pump, Single Seal, Series: Flow-Mate 130, 93 gpm, 1-1/2 in NPT Outlet, 26 ft Maximum Head, 1/2 hp, 115 VAC, 10.7 A, 60 Hz Frequency, 1 ph ph, 1750 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Sleeve Bearing, Cast Iron, 12-3/4 in H Dimensions
Features:
- Corrosion-resistant, powder coated epoxy finish
- Durable, cast iron construction with switch case motor and pump housing, base and impeller
- Float operated, 2-pole mechanical switch (automatic units only)
- No sheet metal parts to rust or corrode
- Oil filled, hermetically-sealed, automatic reset thermal overload protected (1 ph only) motor
- Upper and lower sleeve bearings running in bath of oil
- Carbon and ceramic shaft seal
- Stainless steel screws, bolts, guard, handle, arm and seal assembly
- 130 deg F (extra duty of 140 deg F) maximum temperature for effluent or dewatering
- Passes 5/8 in spherical solids
- No screens to clog
- 10 in on point and 2-3/4 in off point
- Simplex and duplex package systems available
- Variable level control systems available, designed for Heavy duty effluent applications
- Mechanical alternators for duplex systems are available with or without alarm switches
- Effluent or dewatering submersible pump for septic tank, low pressure pipe (LPP) and enhanced flow STEP systems
- Castings of model 137 is cast iron ASTM class 25, 2500# tensile strength
- Oil filled cooling
Applications:
Step/Onsite, Water Transfer and Light Commercial Dewatering Application
Standards/Approval:
- AISI 1215 Motor Shaft
- ASTM Cast Iron Body
- CSA Certified
- SSPMA Standard
- UL Listed
