The USCFW080073BDN1A1Z Inverter from WEG Electric Corp is a high-performance solution for variable speed control, rated at 73 HP and designed for 200-240V applications. This inverter incorporates advanced technology for efficient motor control and energy savings. It complies with international safety standards, ensuring reliable operation in demanding environments. The compact design facilitates easy installation, making it suitable for a wide range of industrial applications.
Item # CFW080073BDN1A1Z, Variable Frequency Drives, Low Voltage, CFW08, 1/4-20HP Compact Drive On WEG Electric Corp.
WEG Electric Corp. : Variable Frequency Drives : Low Voltage : Drives : CFW08, 1/4-20HP Compact Drive : CFW08, 1/4-20HP Compact Drive : Item # CFW080073BDN1A1Z
The WEG CFW08 Plus Series is a redesign of our successful line VFDs. Engineering improvements have produced one of the most compact and full featured microdrives in the marketplace. Outstanding features and options in a NEMA 1 enclosure allow the CFW08 Plus to be successfully used in a large variety of applications.
| Motor Volts | 230 V |
| Input Power Supply | Single or 3-Phase 230V |
| Motor HP | 2 |
| Drive AMPS | 7.3 |
| Braking Transistor | YES |
| Frame Size | 2 |
| Dimensions | 9.7 x 4.5 x 5.9 |
| Enclosure | NEMA 1 |
| V/Hz Control | V/Hz and Sensorless Vector Control |
| Input Voltage | Single and Three-phase input voltage. 200-240V or 380-480V input voltage. |
| Current Overload Capacity | 150 % |
| PWM Output | 16 bit DSP controlled PWM output |
| Switching Frequency | 2.5 / 5 / 10 / 15 kHz adjustable swiching frequency |
| Inputs | Four isolated programmable digital inputs. Two isolated programmable analog inputs. |
| Outputs | Two programmable relay outputs |
| Control features | Linear and S-Ramp acceleration and deceleration, local/remote control, DC braking, torque boost, motor slip compensation, electronic pot, preset speeds, adjustable V/Hz profile, maximum and minimum adjustable frequency limits, two skip frequencies, adjustable output current limit, JOG, ride-thru, flying start and PID regulator. |
| Display Readings | Motor speed, frequency, voltage, current, last fault, heatsink temperature and drive status |
| Ambient Temperature | 40 C |
| Altitude | 3300 ft1000 m |
| Humidity | 90% humidity, non-condensing |
| Certifications | CE, UL for US and Canada |
| Optional Features | Dynamic Braking Resistors available Remote Keypad with Copy Function RS-232 or RS-485 Serial Interface Modbus Communication* DIN rail mounting through 2HP *Requires optional RS-232 or RS-485 Interface |
| Protective Features | Over current, motor overload, drive over temperature, output phase-to-phase and phase-to-ground short circuit, DC bus over and under voltage and external fault |
| Approx. Shipping Weight | 6 lbs |
| Disclaimer | Data subject to change without notice. |
