Description

WATTS® Quarter-Turn Ball Valve, 2-Piece, 1-1/2 in Nominal, Solder End Style, 600 psi Pressure, 0 to 450 deg F, Standard Port, Media: Gas/Liquids, 1-1/4 in Orifice, Chrome Plated Brass Ball, 5 in Inlet to Outlet Length, 3 in Top to Inlet Center, Cast Bronze Body, Brass Stem and Durafill® Seat Trim, PTFE Softgoods

Features:

• Chrome plated brass ball is wiped clean during each operation of the valve


• Minimal pressure drop due to large ports


• Blow-out proof, pressure retaining stem


• High cycle life reinforced PTFE stem packing seal and thrust washer


• Low operating torque


• Each valve factory tested


• 150 psi working steam pressure


• This valve is designed to be soft soldered into lines without disassembly, using a low temperature solder to 420 deg f


• PTFE stem packing seal

Applications:

Commercial and Industrial Applications

Standards/Approval:

• ASSE Approved


• BAA/ARRA Compliant


• C36000 ASTM B16 Brass Stem/Packing Nut


• C84400 ASTM B584 Bronze Body


• Compressed Gas (YQNZ)


• Fire Protection (HNFX)


• Flammable Liquids (YRBX)


• FM Approved


• For NO 1/NO 2 Fuel Oils (MHKZ) UL Approved


• LP Gas (YSDT)


• Natural/Manufactured Gas (YRPV)


• NSF Approved


• UL/cUL Listed and USC Approved

Warranty:

1 Year Limited

Ball Material	Chrome Plated Brass
Body Material	Cast Bronze
End Style	Solder
Inlet to Outlet Length	5 in
Media	Gas/Liquids
Nominal Size	1-1/2 in
Orifice Size	1-1/4 in
Port Type	Standard
Pressure Rating	600 psi
Softgoods Material	PTFE
Temperature Rating	0 to 450 deg F
Top to Inlet Center	3 in
Trim Material	Brass Stem and Durafill® Seat
Type	2-Piece
Manufacturer	Watts Regulator Company