Description
WATTS® Pressure Reducing Valve, Standard High Capacity, Series: LF223S, 2 in Nominal, FNPT Union x FNPT, 300 psi, 160 deg F, Media: Water, 16-3/4 in Inlet to Outlet Length, 10-3/4 in Top to Inlet Center, Brass Body, 316 Stainless Steel Trim/304 Stainless Steel Stem/302 Stainless Steel Spring Trim, Buna-N, Domestic
Features:
- NPT threaded union inlet with strainer by NPT female threaded outlet connections
- Lead free cast copper silicon alloy body construction
- Bypass feature controls thermal expansion pressure
- Enlarged diaphragm, sealed spring cage and seat orifice for high capacity performance
- Serviceable in-line
- Sensitive spring and large diaphragm for accurate pressure control
- High temperature resisting diaphragm for hot or cold water
- Disc holder removable for replacement of disc without dismantling the valve, no special tools are required
- Buna-N O-ring/diaphragm/gasket
- The bypass feature will not prevent the pressure relief valve from opening on the hot water supply system with pressure above 150 psi
- A water saving test program concluded that reducing the supply pressure from 80 to 50 psi (551 to 345 kPa) resulted in a water savings of 30%
- The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
Applications:
Commercial, Institutional and Industrial Application
Standards/Approval:
- CSA B356
- IAPMO Listed
- MIL-V-18146B
- NSF/ANSI 61-G
- UPC Listed
- PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
Limited