Description
WATTS® Pleated Filter Cartridge, Standard, Series: PWPL10, 2-3/4 in Dia, 9-3/4 in Length, Polypropylene, Domestic
Features:
- Collects particles throughout the entire thickness of the filter
- 0.35 micron filtration rating
- Rated for temperatures up to 140 deg F
- Filter media is pleated for greater surface area
- Synthetic filter media is cellulose-free
- Thicker filter media has a greater capacity to capture and retain particles, compared to thin, more rigid media types, which have less void space for particle retention
- 0.35 media use a multi-ply laminate for superior performance
- Long lengths have netting to hold pleats in place
- All cartridge types and lengths are wrapped
- Full product line (Large selection of types, lengths and micron ratings)
- Low pressure drop, long life and reduced filtration costs, compared to wound and spun cartridges
- No additives or binders, which may cause foaming
- Increased dirt holding capacity, longer life, fewer cartridge replacements needed and reduced filtration costs, compared to other pleated cartridge suppliers
- Increased particle removal efficiency
- Superior performance and appearance
- Pleated filter cartridges for standard filter housings
- Plastisol end cap
- Polypropylene center tubes
- 20 to 30 psi recommended change out
- Flow rate per 10 in cartridge: 3-10 gpm, depending on micron rating
Applications:
Light Commercial and Residential
Standards/Approval:
- ASSE Listed
- FM/NSF Approved
- UL/ULC Listed
- USC Certified
- WQA Certified
Warranty:
Limited