Description
WATTS®, 0559171, Master Tempering Valve With Check Stop, Series: LFN170, 2 x 1-1/4 in Nominal, NPT End Style, 125 psi Pressure, 5 to 200 deg F, 7 gpm Flow Rate, Media: Water, Brass Body, 16-3/4 in L Dimensions, Domestic
Features:
- 125 gpm capacity at 45 psid
- Paraffin-based thermostat to sense and adjust outlet temperature
- Dirt and lime resistant poppet and seat design
- Vandal-resistant, locking mechanism to secure temperature setting
- Virtual shutoff if supply pressure fails
- Factory tested
- 90 to 180 deg F adjustment temperature
- The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
- Minimum hot water supply temperature: 5 deg F above set point, with equal pressure
- Temperature adjustment range: 90 to 180 deg F, low limit cannot be less than the cold water temperature, for best operation, hot water should be at least 5 deg F above desired set point
- Hot water inlet temperature range: 120 to 180 deg F
- Cold water inlet temperature range: 40 to 80 deg F
Applications:
Commercial and Hot Water Distribution
Standards/Approval:
- ASSE Listed
- FM Approved
- NSF Approved
- UL/ULC/USC Certified
- PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Warranty:
Limited
