Description

WATTS® Pressure Regulator, Miniature, Series: P60-M1, 1/4 in Nominal, FNPT, 300 psi, 150 deg F, Media: Water, 1-9/16 in Inlet to Outlet Length, 2-3/16 in Top to Inlet Center, Noryl® Thermal Plastic Body, Poly-Ether-Sulfone Seat/Buna-N Disc Trim, Buna-N, Domestic

Features:

• Corrosion resistant thermoplastic body
• All internal rubber components such as disc, diaphragm and seals are all FDA grade elastomers
• All internal metal components inch contact with fluid are of 300 series stainless steel
• Compact design and lightweight construction with high flow capacity
• Bottom clean-out plug for easier service
• The wetted surface of this product contacted by consumable water contains less than 0.25 Percent of lead by weight
• Temperature range is 33 F to 150 deg F (0.5 C to 66 deg C)

Standards/Approval:

• NSF/ANSI 61-G
• Eu Approved
• FDA Approved Disc/Seal
• PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Warranty:

Limited

Body Material	Noryl® Thermal Plastic
Domestic/Import	Domestic
End Style	FNPT
Inlet to Outlet Length	1-9/16 in
Media	Water
Nominal Size	1/4 in
Pressure Range	300 psi
Series	P60-M1
Softgoods Material	Buna-N
Temperature Rating	150 deg F
Top to Inlet Center	2-3/16 in
Trim Material	Poly-Ether-Sulfone Seat/Buna-N Disc
Type	Miniature
Manufacturer	Watts Regulator Company